Styrofoam bells

These styrofoam bells were especially made for Ada Quilted Creations. They are solid bells and do not have a gap on the bottom. 

The bells are available in two sizes as described below.

Sizes

1. Height: 16cm (6.30") 

   Diameter: 13cm (5.12")

   

2. Height: 12cm (4.72") 

    Diameter: 10.50cm (4.13")

   

The 12 cm bells are sold in sets of six and the 16 cm are sold in sets of three to save on shipping.   Or

you can choose to buy a set of four bells containing two of each size! 

Please indicate the size or set you need before checkout!

Bell sizes

Create beautiful crafts with these bells like: quilted ornaments, kids crafts,  decoupage, kimekomi ornaments, floral arrangements etc.

The choices are limitless.

The markings are on both sides of the ball but don't reach the marked equator.

If you're looking for beautiful kimekomi ornament tutorials you should definitely check OrnamentDesigns.etsy.com

Need more TUTORIALs on quilted ornaments? or

Looking for DIY kits on ornaments?

Look no further!!

You will find a wide variety of tutorials and DIY kits in the TUTORIALS section in my shop!

A wide variety of polystyrene shapes and other craft supplies are also available in the CRAFT SUPPLIES section in my shop!

 


ADA593

Data sheet

Materials
Foam

Specific References

related products

Tabletop trees

These beautiful and elegant fabric tabletop trees  will make a wonderful addition to your decoration all year round.

The quilted trees shown in the photos were crafted  using a 40 cm and 30 cm styrofoam cones quilted with a grey satin, light silver and light pink cotton fabric. It comes in four different sizes (see the photo of all available Styrofoam cones available)

Notice the clear crystal ball on the top!! It adds such character to the tree!

Size: 

height with the ball on top: 

  • 1.  45cm (17.7 in.), diam. 12cm (4.7 in.)
  • 2.  34cm (13.4 in.), diam. 11cm (4.3 in.)
  • 3.  29cm (11.5 in.), diam. (4 in.)
  • 4.  24 cm (9.5 in.),  diam. (3.6 in.)

These  fabric trees would look great on your mantel or they'd make a thoughtful and unique housewarming gift or even a  Christmas present.

Red and Gold tabletop tree

This beautiful Christmas tabletop tree  will make a wonderful addition to your Christmas decoration.

This quilted tree shown in some of the photos was crafted  using a 40cm styrofoam cone quilted with shimmering gold fabric and red satin. You'll also find photos of smaller trees and in one of the photos you can spot all foam sizes available.

Notice the little bell and key charms hanging from the fabric leaves of the tree and the wooden star on the top!!

Size: 

height with the star on top: 

  • 1.  45cm (17.7 in.), diam. 12cm (4.7 in.)
  • 2.  34cm (13.4 in.), diam. 11cm (4.3 in.)
  • 3.  29cm (11.5 in.), diam. (4 in.)
  • 4.  24 cm (9.5 in.),  diam. (3.6 in.)

This folded fabric tree would look great on your mantel or it could make a thoughtful and unique housewarming gift or Christmas present.

Styrofoam bells

These styrofoam / polystyrene bells have a small gap on the bottom of the bell (check available photos). Each bell will come with a small Styrofoam ball that fits in the gap. The little balls are pre marked with the north and south pole marked along with the equator and the 8 quarters. 

The bells are available in four sizes as described below.

Sizes

1. Height: 16cm (6.30") 

   Diameter: 13cm (5.12")

   Ball: 6cm

2. Height: 11cm (4.33") 

    Diameter: 11cm (4.33")

    Ball: 5cm

3. Height: 9cm (3.54") 

    Diameter: 8.5cm (3.35")

    Ball: 4cm

4. Height: 8cm (3.15") 

    Diameter: 8.5cm (3.35")

    Ball: 4cm

Tabletop tree with skirt pattern

Tabletop tree with a skirt original pattern tutorial. This tutorial will show you step by step instructions with lots of pictures on how to make this beautiful quilted no sew tabletop tree. 

I created this pattern a few years ago when I was trying to create something different looking than a plain quilted tree - in order to use it as a main decorative piece for my dining table. 

These centerpieces can be used every day, in your holiday table, in your mantle, the office, the kitchen or you can make a wonderful hostess gift out of them.  This pattern will look beautiful in whatever fabric you use but it will be spectacular in organza, satin, taffeta or sheer fabrics!!!! 

Many times I use curtain fabrics that are sheer and “fluffy” so I can add volume to my crafts. 

16 other products in the same category:

Polystyrene body shapes / angel forms - set of 6

These styrofoam / polystyrene cone body shapes are perfect for making body shapes like angels, monsters, people or whatever your imagination comes up with. You can use sequins, decoupage techniques, fabric or even paint. Perfect for quilted angel ornaments. 

Great quality EPS. 

They are sold in sets of six in two different sizes:

- Height: 10 cm (4 in.)  Base diameter: 4.5 cm (1.77 in.)

- Height: 15 cm (6 in.)  Base diameter: 7 cm (2.75 in.)

Swirl foam ornament (set of 6pcs)

Gorgeous swirl ornament already marked ready to be decorated! This set of 6 styrofoam / polystyrene ornaments have pre-marked  lines swirling from the top of the ornament to the bottom. 

Diameter: 9 cm (3.54 inches)

Height: 11 cm (4.33 inches)

Get a better value when purchasing a set of twelve ornaments. Please indicate before checkout!

Create beautiful crafts with these ornaments like: kids crafts,  decoupage, kimekomi ornaments, floral arrangements etc.

These ornaments are divided in marked segments and would be perfect for making ornaments (kimekomi, quilted etc).

The choices are limitless.

Jelly Bean House foam shapes

These styrofoam Jellybean houses were especially made for Ada Quilted Creations and were inspired by Kathy Beckers design of a Jellybean house template. 

The houses are available in sets of six and in sets of three.

Size: 8 cm x 8 cm (3 - 3.15 inches) 

   Width: 5 cm (2 inches)

sold in sets of six    OR    in sets of three 

   

Please indicate the set you need before checkout!

The tutorial for these beautiful ornaments can be found  in Kathy Becker's etsy shop in the tutorial section:

https://www.etsy.com/listing/1788596260/tutorial-jelly-bean-house-ornament

Polystyrene wreaths

These styrofoam / polystyrene wreaths are great for many diy crafts. The larger sizes are perfect for making quilted wreaths. In fact these are the ones I'm using in my wreaths (Check the wreath and nursery section in my shop to get some ideas).

Great quality EPS. They come in six different sizes (diameter). Each size is sold in different quantities to optimize shipping costs.

Sizes available:

  • Diameter: 10 cm (4 inches) sold in sets of six
  • Diameter: 15 cm (5.91 inches) sold in sets of three
  • Diameter: 18 cm ( 7.09 inches) sold in sets of two
  • Diameter: 22 cm (8.66 inches) sold in sets of three
  • Diameter: 25 cm (9.84 inches) sold in sets of three
  • Diameter: 30 cm (11.81 inches) sold individually 

There's also a free shipping guarantee for all orders of €35 or more.

Large polystyrene eggs 10 cm (4") (set of 6)

This set of 6 large styrofoam / polystyrene eggs have the north and south pole marked along with the egg's perimeter and the 8 quarters.

The markings are on both sides of the egg but don't reach the marked perimeter.

Get a better value when purchasing a set of twelve eggs. Please indicate before checkout!

Size: 

height-10 cm (3.94 inches)  perimeter - 22 cm (8.66 inches).

These are quite larger than an actual egg, which is approximately 7cm high.

Check the available photos and you will see all three different sizes available in my shop!

All polystyrene shapes are produced in the European union.

Large polystyrene pumpkin

These styrofoam pumpkins are great for many diy crafts. Easy to paint over or adhere materials to, for many different crafts.

This large sized pumpkin would be perfect for making quilted or kimekomi crafts. The pumpkin is sold individually.

Size:

Diameter 12.50cm (4.93"") 

Height 8.50cm (3.35"")

There's also a free shipping guarantee for all orders of €40 or more. 

Oval foam discs (set of 10)

This super soft elliptical oval disc is custom made for Ada Quilted Creations and is sold only here in sets of 10, 20 or 30!

Diameter: 8 - 9 cm (3 - 3.54 inches)

Height: 4.5cm (1.75 inches)

Even though the texture looks a bit bumpy nothing shows when it's covered with fabric if you're making pinwheel ornaments. Please check the available photos for a finished ornament made by myself using this disc. 

 If you need to use the disc to portray an image I would suggest to use some batting or felt underneath the image! If you need any clarifications do not hesitate to contact me.

There's also a free shipping guarantee for all orders of €35 or more. 

Styrofoam bells

These styrofoam / polystyrene bells have a small gap on the bottom of the bell (check available photos). Each bell will come with a small Styrofoam ball that fits in the gap. The little balls are pre marked with the north and south pole marked along with the equator and the 8 quarters. 

The bells are available in four sizes as described below.

Sizes

1. Height: 16cm (6.30") 

   Diameter: 13cm (5.12")

   Ball: 6cm

2. Height: 11cm (4.33") 

    Diameter: 11cm (4.33")

    Ball: 5cm

3. Height: 9cm (3.54") 

    Diameter: 8.5cm (3.35")

    Ball: 4cm

4. Height: 8cm (3.15") 

    Diameter: 8.5cm (3.35")

    Ball: 4cm